{"id":472,"date":"2023-12-27T14:40:32","date_gmt":"2023-12-27T14:40:32","guid":{"rendered":"https:\/\/teal-horse-855889.hostingersite.com\/?post_type=product&p=472"},"modified":"2023-12-27T14:40:32","modified_gmt":"2023-12-27T14:40:32","slug":"05-06-07-08-09-land-rover-range-rover-sports-lr3-v8-4-4l-engine-motor-assy-120k","status":"publish","type":"product","link":"https:\/\/autoaccessories.store\/index.php\/product\/05-06-07-08-09-land-rover-range-rover-sports-lr3-v8-4-4l-engine-motor-assy-120k\/","title":{"rendered":"05 06 07 08 09 LAND ROVER RANGE ROVER SPORTS LR3 V8 4.4L ENGINE MOTOR ASSY-120K"},"content":{"rendered":"

ENGINE<\/strong><\/p>\n

Determine why the original engine failure occurred and make appropriate repairs BEFORE INSTALLING A NEW ENGINE.<\/p>\n

Ensure this engine you are purchasing is the same application as the one being replaced.<\/p>\n

Clear all computer diagnostic codes from the vehicle prior to installing.<\/p>\n

Exchange the oil pan and pick-up tube.<\/p>\n

Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).<\/p>\n

All crankshaft bolts that are drilled through sealant must be applied to avoid leaks.<\/p>\n

Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed)<\/p>\n

Replace the timing belt and water pump and Install replacement sparkplugs & wires.<\/p>\n

Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).<\/p>\n

Disable fuel\/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.<\/p>\n

Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.<\/p>\n

Drain excess oil and coolant from exhaust system.<\/p>\n

If equipped with an engine oil cooler the radiator or external cooler must be replaced.<\/p>\n

Ensure the cooling system is flushed and functioning properly.<\/p>\n

\n

TRANSMISSION<\/strong><\/p>\n

Determine why the original transmission failure occurred and make appropriate repairs<\/p>\n

Ensure the purchased transmission is materially the same as the one to be replaced<\/p>\n

Remove oil pan and replace filter, remove torque converter strap and replace front seal.<\/p>\n

Properly install and index the torque converter completely into the front pump.<\/p>\n

Inspect and replace rear seal as\u00a0needed and\u00a0change over sensors as needed.<\/p>\n

Flush the transmission cooler lines and radiator with a power flush machine or with an aerosol ‘Cooler Flush Kit’. This will ensure the cooling system is flowing.<\/p>\n

Replace the radiator or cooler if recommended by the manufacturer.<\/p>\n

Clear all transmission computer codes in the vehicle prior to starting or operating.<\/p>\n

Fill the transmission with the OEM recommended fluids.<\/p>\n

Verify the differential portion of the transmission is full of fluid.<\/p>\n

Most 4WD & some 2WD vehicles must re-learn the shift logic to the transmission after installation. You may verify with your local dealer if a re-learn is required for your vehicle. Service is not reimbursable.<\/p>\n","protected":false},"excerpt":{"rendered":"

\n
\n

Item specifics<\/span><\/span><\/h2>\n<\/div>\n<\/div>\n
\n
\n
\n
\n
\n
\n
Condition<\/span><\/div>\n<\/div>\n<\/div>\n
\n
\n
Used<\/span><\/div>\n<\/div>\n